Comfort while you train

TriPad wraps around the shaft and closes with its own velcro arms, and it’s long enough to go around an extender or a pump cylinder as well. Warmth and vibration help you relax into your session and keep long sessions comfortable. Red and near-infrared light runs alongside them. Use them in any combination, during your routine or to wind down after.

Any combination you like

Heat, vibration and light each have their own on/off on the wired controller, and none of them needs the others. Run light and vibration with the heat off while you pump. Use the light by itself. Use heat and vibration to wind down after. Or switch on all three.

Heat

Soothing warmth to help you relax into your session. Three heat levels plus off. Skin here is thinner and more sensitive than elsewhere, so start on the lowest level every time and only go up if it stays comfortable. Don’t use the highest level for a long session, and never sleep with the pad on.

Vibration

A gentle massage feel that keeps long sessions comfortable. Two built-in vibration motors, with three intensities plus off.

Red and near-infrared light

The same wavelengths used in popular red light panels, built into the pad. Near-infrared reaches deeper than visible red, so you get both. 60 LEDs in a 5 x 12 grid, each one combining 660 nm red and 850 nm near-infrared. Five brightness levels, and three light modes: steady, 10 Hz pulse and 40 Hz pulse.

Timer

Set any session from 10 to 90 minutes, in 10-minute steps.

Made to wrap, and to wipe clean

The skin-facing side is a frosted TPU layer over the LEDs: it protects them and wipes clean. The two velcro arms sit beyond the pad itself, so it closes around the shaft on its own, or around the shaft together with an extender or a pump cylinder. It isn’t oversized: the pad is sized to cover the shaft only, and to stay clear of the glans.

Plain packaging

TriPad ships in a plain kraft box with no logo, product name or pictures, inside a plain shipping box. Nothing on the outside says what it is.

What’s in the box

• TriPad pad with two velcro arms
• Wired controller
• 12 V power adapter (US plug)
• Quick-start and safety sheet

Specifications

• Pad: about 30 x 12.2 cm (11.8 x 4.8 in), plus two velcro arms
• LEDs: 60 LEDs in a 5 x 12 grid, each 660 nm red + 850 nm near-infrared
• Light: 5 brightness levels; steady, 10 Hz or 40 Hz pulse
• Heat: 3 levels plus off
• Vibration: 2 motors, 3 levels plus off
• Timer: 10 to 90 minutes
• Controls: wired controller; heat, vibration and light each switch on and off independently, in any combination; levels, pulse and timer set separately
• Power: 12 V DC plug-in adapter, no battery
• Skin-facing surface: frosted TPU, wipe clean
• Packaging: plain kraft box, no branding
• Model: HX-TP1
• Made in China

Getting started safely

• Start every session on the lowest heat and vibration settings.
• Keep the first sessions short (5 to 10 minutes) until you know how your body responds.
• Don’t fasten the pad tightly, and don’t use the highest heat level for a long session. Long contact with a warm surface can burn even when it doesn’t feel hot.
• Never fall asleep with the pad on.
• Stop and see a doctor if you feel pain, burning, numbness or skin irritation, or see blistering or a change in skin colour.
• Don’t use it on broken or irritated skin, or if you have reduced sensation in the area (for example from diabetes or nerve damage).
• If you have a medical condition, or are unsure whether it’s right for you, check with a doctor first.
• Adults 18+ only. Not a medical device.

Care and cleaning

• Unplug the pad before cleaning.
• Wipe the TPU side with a damp cloth and mild soap, or an alcohol wipe, and let it dry fully before the next use.
• Don’t submerge it, machine-wash it or put it in a dryer. The electronics are sewn inside.
• Keep the controller and the adapter dry.
• Store it flat or loosely rolled; don’t fold it sharply across the LEDs.

Pre-order terms

• You’re charged when you place the pre-order.
• Estimated ship date: by late January 2027. Production is under way and the batch is due to reach us in December; the extra weeks are buffer.
• If anything changes, we’ll email you before the date passes with the new date and the choice to cancel for a full refund, or to keep your place.
• Cancel for a full refund any time until a tracking number has been created for your order.
• Ships to US addresses only.

Frequently asked questions

When should I use it: before, during or after a session?
Whenever it feels best. Heat and vibration are nice for getting comfortable before you start, light and vibration run fine during a pump or extender session, and heat is good for winding down after.

Can I use it while pumping? Does it go inside the cylinder?
Never inside. It wraps around the outside of the cylinder and closes with its own velcro arms.

Does it work with my extender?
It wraps around the shaft and the extender’s rods together. It’s tethered: the pad plugs into the wired controller, which plugs into the wall, so you’ll be near an outlet.

What size is it?
The pad is 30 x 12.2 cm (11.8 x 4.8 in), plus two velcro arms. The 12.2 cm side runs along the shaft, and the 30 cm side wraps around it.

Can I use heat and vibration with the light off?
Yes. The light switches fully off on the controller.

Why does the light look dim?
850 nm near-infrared is mostly invisible to your eyes, so the pad looks dimmer than it is. The red you see is the 660 nm half.

What are the 10 Hz and 40 Hz pulse modes for?
They’re options found on many red light panels, and we include them so you can choose. Steady is the default. Use whichever you prefer.

Is it safe for my eyes?
Don’t look straight into the LEDs up close. Switch the light off before taking the pad off.

How hot does it get?
The controller’s three heat settings are labelled 45 °C, 50 °C and 55 °C. Those are setting labels, not a guaranteed skin temperature. Start on the lowest setting every time.

Can I use heat near the testicles?
Keep the pad on the shaft. It isn’t made to sit on the scrotum.

Does it have a battery?
No. It runs from the included 12 V wall adapter.

How long can I use it for?
Up to 90 minutes a session on the timer. Keep the first sessions to 5 to 10 minutes, don’t use the top heat setting for a long session, and never sleep with it on.

Who makes TriPad?
Halodyx, a small company in Los Angeles. TriPad is made in China to our spec.

What shows on my card statement?
HALODYX. The box is plain kraft inside a plain shipping box, with nothing on the outside that says what it is.

Is the $99.99 pre-order price locked in?
Yes. You pay $99.99 today. The price goes to $119.99 when TriPad ships, and after the pre-sale ends prices may change at any time.

What if it stops working?
Tell us within 7 days of delivery, with your order number, a description and photos, and we review it case by case. See our Refund and Returns Policy.

Can I return it unopened?
No. It’s a personal-care item used on intimate areas, so we don’t accept returns once it has shipped. You can cancel for a full refund any time until a tracking number is created.

Do you ship outside the US?
Not yet. Join the email list below to hear when we do.